Smart Rod System
Typical installation of Smart Rod in Cooling Tower basin
-
For efficient and clean operation of Cooling Towers with greatly reduced Make up water & Blow-down frequencies(by enabling them to operate at relatively higher COC).
-
For consistent performance of Chillers by retarding the growth of scale and biofilm built-up in their Evaporators and Condensors.
-
For RO Membrane Fouling prevention(for continuous & higher through put at all times) with significantly reduced CIPs with increased membrane life span.
-
For enhanced performane of Steam Generators and small to medium sized Boilers.
-
For optimized heat transfer of Heat Exchangers in CPI Industries and Surface Condensors in Power plant (by keeping their tubes clean at all times) and preventing expensive downtimes.
-
For continuous operation of MEEs to enable ETPs operate at full capacity at all times and reduce the CIP cycles.
Smart Rod System removes scale & biofouling from the Surface of RO membranes
-
Easy to install and incorporate in existing set-ups being very compact in size.
-
No moving parts and therefore, practically nil maintenance.
-
Has very low operating cost as it consumes only around 0.005 Kw electricity.
-
Can be incorporated in Stagnant as well as FLowing water systems as well.
Can be scaled up or infinity Capacity.
-
Mildly increases the pH level of water, reducing the corrosion rates of Pipes, Tubes and Fittings.
-
Reduces load to the ETP systems due to lower water wastages & thus its operating cost.
-
Enables extremely fast payback periods due to reduction in usage of Scale, Biofilm and Algae prevention Chemicals, Chemical storage space, reduced labour inputs & less water wastages.
Smart Rod enhances Chiller performance by ensuring clean tubes all times
